INTERNATIONAL ADVISORY BOARD
13th International Ceramics Congress

Symposium CA
Ceramic Powders: Advances in Synthesis, Processing and Manufacturing

Programme Chair:
Masahiro YOSHIMURA, National Cheng Kung University, Taiwan

Members:
Jean-François BAUMARD, SPCTS, European Ceramic Center, France
Stuart BLACKBURN, The University of Birmingham, UK
Rajendra K. BORDIA, Clemson University, USA
Paul BOWEN, EPFL, Switzerland
K. BYRAPPA, University of Mysore, India
Thierry CHARTIER, SPCTS, European Ceramic Center, France
Mari-Ann EINARSRUD, Norwegian University of Science & Technology, Norway
Rainer GADOW, University of Stuttgart, Germany
Gregory K.L. GOH, Nanyang Technological University, Singapore
Olivia GRAEVE, University of California, San Diego, USA
Thomas GRAULE, EMPA, Switzerland
Jing-Kun GUO, Shanghai Institute of Ceramics, China
Krzystof HABERKO, AGH University of Science and Technology, Poland
Ken HIROTA, Doshisha University, Japan
Junichi HOJO, Kyushu University, Japan
Suk-Joong L. KANG, KAIST, Korea
Sridhar KOMARNENI, Penn State University, USA
Edson Roberto LEITE, Federal University of Sao Carlos, Brazil
Alexander MICHAELIS, Fraunhofer IKTS, Germany
Makio NAITO, Osaka University, Japan
Victor M. ORERA, Instituto de Ciencia de Materiales de Aragon, Spain
Roman PAMPUCH, University of Science & Technology Krakow, Poland
Giuseppe PEZZOTTI, Kyoto Institute of Technology, Japan
Andreas ROOSEN, University of Erlangen-Nuremberg, Germany
Fabrice ROSSIGNOL, University of Limoges, SPCTS, France
Pavol SAJGALÍK, Institute of Inorganic Chemistry, Slovakia
Yoshio SAKKA, NIMS, Japan
Gian Domenico SORARU', University of Trento, Italy
Chris SORRELL, University of New South Wales, Australia
Mikolaj SZAFRAN, Warsaw University of Technology, Poland
Veena TIKARE, Sandia National Laboratories, USA
Jyh-Ming TING, National Cheng Kung University, Taiwan
Dragan P. USKOKOVIC, Institute of Technical Sciences of SASA, Serbia

Symposium CB
Progress in Non Conventional and Novel Manufacturing Routes to Ceramics

Programme Chair:
Ralf RIEDEL, Technical University Darmstadt, Germany

Members:
James ADAIR, Penn State University, USA
Dinesh AGRAWAL, Penn State University, USA
Florence BABONNEAU, Université Pierre et Marie Curie, France
Byeong-Soo BAE, KAIST, Korea
Alessandra BIANCO, University of Rome "Tor Vergata", Italy
Joachim BILL, University of Stuttgart, Germany
Ricardo H.R. CASTRO, University of California, Davis, USA
Nachum FRAGE, Ben-Gurion University of the Negev, Israel
Javier GARAY, University of California, Riverside, USA
Peter GREIL, University of Erlangen-Nuernberg, Germany
Young Hwan HAN, Yeungnam University, Korea
Dong Pyo KIM, POSTECH, Korea
Hans-Joachim KLEEBE, Technical University Darmstadt, Germany
Sanjay KUMAR, CSIR-National Metallurgical Laboratory, India
Jennifer LEWIS, University of Illinois at Urbana-Champaign, USA
Yali LI, Tianjin University, China
Jacques LIVAGE, College de France, France
Sylvain MARINEL, ENSICAEN, France
Martha MECARTNEY, University of California, Irvine, USA
Philippe MIELE, Université Montpellier 2, France
Eugene A. OLEVSKY, San Diego State University, USA
Kurosch REZWAN, University of Bremen, Germany
Richard E. RIMAN, Rutgers University, USA
Clement SANCHEZ, Université Pierre et Marie Curie, France
Kenneth SANDHAGE, Georgia Institute of Technology, USA
Saburo SANO, AIST, Japan
Tsugio SATO, Tohoku University, Japan
Julie M. SCHOENUNG, University of California, Davis, USA
Toshimori SEKINE, Hiroshima University, Japan
James SHEN, University of Stockholm, Sweden
Wolfgang SIGMUND, University of Florida, Gainesville, USA
Yoko SUYAMA, Shimane University, Japan
Paula Maria VILARINHO, University of Aveiro, Portugal
Di ZHANG, Shanghai JiaoTong University, China
Igor ZHITOMIRSKY, McMaster University, Canada

Special Session CB-9
SHS Ceramics

Chair:
Alexander S. ROGACHEV, ISMAN, RAS, Russia

Members:
Umberto ANSELMI-TAMBURINI, University of Pavia, Italy
Inna P. BOROVINSKAYA, ISMAN, RAS, Russia
Giacomo CAO, Università di Cagliari, Italy
Shyan-Lung CHUNG, National Cheng Kung University, Taiwan
Chang-Chun GE, University of Science & Technology Beijing, China
Suren L. KHARATYAN, Yerevan State University, Armenia
Boris KHINA, Physico-Technical Institute, NASB, Belarus
Evgeny LEVASHOV, Moscow Steel and Alloys Institute, Russia
Jerzy LIS AGH, University of Science and Technology, Poland
Nikolay Z. LYAKHOV, Inst.Solid State Chem.& Mechanochem., Sib.Branch of RAS, Russia
Zulkhair MANSUROV, Institute of Combustion Problems, Kazakhstan
Alexander MUKASYAN, University of Notre Dame, USA
Osamu ODAWARA, Tokyo Institute of Technology, Japan
Miguel A. RODRIGUEZ, Instituto de Ceramica y Vidrio, CSIC, Spain
Alexander E. SYTSCHEV, ISMAN, RAS, Russia
Giorgi TAVADZE, Ferdinand Tavadze Inst.of Metallurgy & Materials Science, Georgia
Naresh THADHANI, Georgia Institute of Technology, USA
Galina XANTHOPOULOU, NCSR "Demokritos", Greece

Symposium CC
Materials Solutions for Highly Demanding Tribological Applications

Programme Chair:
Ali ERDEMIR, Argonne National Laboratory, USA

Members:
Koshi ADACHI, Tohoku University, Japan
Yasuhisa ANDO, Tokyo University of Agriculture and Technology, Japan
José Daniel BIASOLI DE MELLO, Federal University of Uberlandia, Brazil
Robert W. CARPICK, University of Pennsylvania, USA
Jean-Pierre CELIS, KU Leuven, Belgium
Maria I. DE BARROS, Ecole Centrale de Lyon, France
Goffredo DE PORTU, ISTEC-CNR, Italy
Christopher DELLACORTE, NASA, Glenn Research Center, USA
Martin DIENWIEBEL, Microtribology Centre - KIT, Germany
Michael DUGGER, Sandia National Laboratories, USA
Judith A. HARRISON, United States Naval Academy, USA
Kenneth HOLMBERG, VTT Technical Research Centre of Finland, Finland
Masami IKEYAMA, AIST, Japan
Staffan JACOBSON, Uppsala University, Sweden
Dae-Eun KIM, Yonsei University, Korea
Jacqueline KRIM, North Carolina State University, USA
Laurence MARKS, Northwestern University, USA
Denis MAZUYER, Ecole Centrale de Lyon, France
Ernst MEYER, University of Basel, Switzerland
Claudio MIGLIARESI, University of Trento, Italy
Kouji MIURA, Aichi University of Education, Japan
Kyoung Il MOON, KITECH, Korea
Michael MOSELER, Fraunhofer IWM, Germany
Sandra E. RODIL, Universidad Nacional Autonoma de Mexico, Mexico
Naruo SASAKI, Seikei University, Japan
W. Gregory SAWYER, University of Florida, USA
Udo SCHWARZ, Yale University, USA
Sujeet K. SINHA, Indian Institute of Technology, Kanpur, India
Nicholas D. SPENCER, ETH Zurich, Switzerland
Margaret STACK, University of Strathclyde, UK
Tom TROCZYNSKI, University of British Columbia, Canada
Mustafa URGEN, Istanbul Technical University, Turkey
Lucia VIEIRA SANTOS, University of Paraiba Valley, Brazil

Symposium CD
Joining Inorganic Materials at Different Length Scales

Programme Chair:
Jolanta JANCZAK, EMPA, Switzerland

Members:
Viola L. ACOFF, University of Alabama, USA
Florian BANHART, Universitè de Strasbourg, France
Mathieu BROCHU, McGill University, Canada
John A. FERNIE, AWE, UK
Natalya FROUMIN, Ben-Gurion University of the Negev, Israel
Masahiro FUKUMOTO ,Toyohashi University of Technology, Japan
Andreas GLAESER, University of California, Berkeley, USA
Dmitry G. GROMOV, Moscow Institute of Electronic Technology, Russia
Michael C. HALBIG, NASA Glenn Research Center, USA
Akio HIROSE, Osaka University, Japan
Fiqiri HODAJ, Grenoble Institute of Technology, France
Yu-Dong HUANG, Harbin Institute of Technology, China
Wayne KAPLAN, Technion - Israel Institute of Technology, Israel
Kevin M. KNOWLES, University of Cambridge, UK
Katsuyoshi KONDOH, Osaka University, Japan
Charles LEWINSOHN, Ceramatec Inc., USA
Leijun LI, Utah State University, USA
Yongfeng LU, University of Nebraska-Lincoln, USA
Alberto PASSERONE, IENI-CNR, Italy
Ivar E. REIMANIS, Colorado School of Mines, USA
Eduardo SAIZ GUTIERREZ, Imperial College, UK
Julius C. SCHUSTER, University of Vienna, Austria
Natalia SOBCZAK, Foundry Research Institute, Poland
Ravi Kant SONI, Indian Institute of Technology Delhi, India
Tadatomo SUGA, University of Tokyo, Japan
Shun-ichiro TANAKA, Tohoku University, Japan
Mauricio TERRONES, Pennsylvania State University, USA
Jun WEI, Singapore Institute of Manufacturing Technology, Singapore

Symposium CE
Innovative Synthesis and Processing of Nanostructured, Nanocomposite and Hybrid Functional Materials for Energy and Sustainability

Programme Chair:
Sanjay MATHUR, University of Cologne, Germany

Members:
Davide BARRECA, Padova University, Italy
Elisabetta COMINI, CNR-IDASC & University of Brescia, Italy
Zorica CRNJAK OREL, National Institute of Chemistry, Slovenia
Claus FELDMANN, Institute for Inorganic Chemistry - KIT, Germany
M. Saif ISLAM, University of California, Davis, USA
Menka JAIN, University of Connecticut, USA
Hidehiro KAMIYA, Tokyo University of Agriculture and Technology, Japan
Aivaras KAREIVA, Vilnius University, Lithuania
Amarjeet KAUR, University of Delhi, India
Masoud LATIFI, Amirkabir University of Technology, Iran
Yoshitake MASUDA, AIST, Japan
Bodh Raj MEHTA, Indian Institute of Technology Dehli, India
Gary L. MESSING, Pennsylvania State University, USA
Juan-Ramon MORANTE, IREC & University of Barcelona, Spain
Anja-Verena MUDRING, Ruhr-University Bochum, Germany
Daniel NIZNANSKY, Charles University, Czech Republic
Volkan OZGUZ, Sabanci University, Turkey
Greta R. PATZKE, University of Zurich, Switzerland
Kohei SOGA, Tokyo University of Science, Japan
Madhavi SRINIVASAN, Nanyang Technological University, Singapore
Dunwei WANG, Boston College, USA
Zhong Lin WANG, Georgia Institute of Technology, USA

Symposium CF
High and Ultra High Temperature Ceramics for Extreme Environments

Programme Chair:
William G. FAHRENHOLTZ, Missouri University of Science and Technology, USA

Members:
Rotislav ANDRIEVSKI, Institute of Problems of Chemical Physics, RAS, Russia
Jon BINNER, The University of Birmingham, UK
Bill CLEGG, University of Cambridge, UK
Erica L. CORRAL, University of Arizona, USA
Robert DANZER, University of Leoben, Austria
Arturo DOMINQUEZ RODRIGUEZ, University of Sevilla, Spain
Jan DUSZA, Institute of Materials Research, SAS, Slovakia
William A. ELLINGSON, Argonne National Laboratory, USA
Gilbert FANTOZZI, INSA de Lyon, France
George V. FRANKS, University of Melbourne, Australia
Stuart HAMPSHIRE, University of Limerick, Ireland
Jürgen G. HEINRICH, Clausthal University of Technology, Germany
Michael J. HOFFMANN, Institute for Applied Materials - KIT, Germany
Sylvia JOHNSON, NASA Ames Research Center, USA
Do Kyung KIM, KAIST, Korea
Hiroshi KIMURA, National Defense Academy of Japan, Japan
Peter KROLL, University of Texas, Arlington, USA
Edgar LARA-CURZIO, Oak Ridge National Laboratory, USA
William LEE, Imperial College London, UK
Giuseppe MAGNANI, ENEA Centro Ricerche Faenza, Italy
Hasan MANDAL, Sabanci University, Turkey
Klaus G. NICKEL, Tuebingen University, Germany
Elisabeth OPILA, University of Virginia, USA
Triplicane A. PARTHASARATHY, UES Inc., USA
Daniel RILEY, ANSTO, Australia
Jitendra P. SINGH, U.S. Army Resarch Laboratory, USA
Gregory B. THOMPSON, University of Alabama, USA
Wei-Hsing TUAN, National Taiwan University, Taiwan
Fumihiro WAKAI, Tokyo Institute of Technology, Japan
Eric WUCHINA, Office of Naval Research, USA
Yanchun ZHOU, Aerospace Res.Inst.of Matls & Processing Technology, China

Symposium CG
Progress in Nano-laminated Ternary Carbides and Nitrides (MAX Phases) and Derivatives Thereof (MXenes)

Programme Chair:
Michel W. BARSOUM, Drexel University, USA

Members:
Rajeev AHUJA, Uppsala University, Sweden
Bikramjit BASU, India Institute of Science, Bangalore, India
Matthieu BUGNET, McMaster University, Canada
Thierry CABIOCH, University of Poitiers, France
Sylvain DUBOIS, University of Poitiers, France
Xiaodong HE, Harbin Institute of Technology, China
Chunfeng HU, Ningbo Institute of Material Technology & Engineering, China
Lars HULTMAN, Linkoping University, Sweden
Milan RADOVIC, Texas A&M University, USA
Johanna ROSEN, Linkoping University, Sweden
Surendra SAXENA, Florida International University, USA
Peter SCHAAF, Ilmenau University of Technology, Germany
Jochen M. SCHNEIDER, RWTH Aachen University, Germany
Zheng Ming SUN, AIST, Japan
Jingyang WANG, Shenyang National Lab.for Materials Science, China

Symposium CH
Porous Ceramics for Environmental Protection, Energy-related Technologies and Advanced Industrial Cycles

Programme Chair:
Paolo COLOMBO, University of Padova, Italy

Members:
Joerg ADLER, Fraunhofer IKTS Dresden, Germany
Lennart BERGSTROM, University of Stockholm, Sweden
Henry J.M. BOWMEESTER, University of Twente, Netherlands
Nitin CHOPRA, The University of Alabama, USA
Sylvain DEVILLE, UMR3080 CNRS/Saint-Gobain CREE, France
Katherine FABER, Northwestern University, USA
José Maria FERREIRA, University of Aveiro, Portugal
Georg GRATHWOHL, University of Bremen, Germany
Keith E. GUBBINS, North Carolina State University, USA
Ellen IVERS-TIFFÉE, Karlsruhe Institute of Technology (KIT), Germany
Yuji IWAMOTO, Nagoya Institute of Technology, Japan
Philip R. JACKSON, CERAM Research Ltd, UK
Katsumi KANEKO, Shinshu University, Japan
Young-Wook KIM, University of Seoul, Korea
Nitin LABHSETWAR, CSIR-NEERI, India
Scott MISTURE, Alfred University, USA
Laura MONTANARO, Politecnico di Torino, Italy
Rodrigo MORENO, CSIC, Instituto de Ceramica Y Vidrio, Spain
Kazuki NAKANISHI, Kyoto University, Japan
Alexander V. NEIMARK, Rutgers University, USA
Kazushige OHNO, Ibiden Co., Ltd., Japan
Alberto ORTONA, University of Applied Sciences (SUPSI), Switzerland
Alain PIERRE, Inst.de Recherche sur la Catalyse, Villeurbanne, France
Alexander J. PYZIK, The Dow Chemical Company, USA
Michael SCHEFFLER, Magdeburg University, Germany
David S. SMITH, University of Limoges, France
Matthias THOMMES, Quantachrome Corporation, USA
Tim VAN GESTEL, Forschungszentrum Juelich GmbH, Germany
Ulrich VOGT, EMPA, Switzerland
Yusuke YAMAUCHI, NIMS, Japan
Yongjie YAN, Shanghai Institute of Ceramics, CAS, China
Yu ZHOU, Harbin Institute of Technology, China

Symposium CI
Ceramic Thin Films and Coatings for Protective, Tribological and Multifunctional Applications

Programme Chair:
Christoper C. BERNDT, Swinburne University of Technology, Australia

Members:
Jun AKEDO, AIST, Japan
Samir M. AOUADI, University of North Texas, USA
Alain DENOIRJEAN, University of Limoges, CNRS, France
Diederik DEPLA, Ghent University, Belgium
Per EKLUND, Linkoeping University, Sweden
Steven L. GIRSHICK, University of Minnesota, USA
Wayne L. GLADFELTER, University of Minnesota, USA
Philippe GOUDEAU, Université de Poitiers, France
Sang Sub KIM, Inha University, Korea
Seiji KURODA, NIMS, Japan
Enrique J. LAVERNIA, University of California, Davis, USA
Luca LUSVARGHI, University of Modena & Reggio Emilia, Italy
Tapio MANTYLA, Tampere University of Technology, Finland
Christian MITTERER, University of Leoben, Austria
Ghislain MONTAVON, Université de Technologie de Belfort-Montbéliard, France
Christian MOREAU, IMI-CNRC, Canada
Javad MOSTAGHIMI, University of Toronto, Canada
Nitin P. PADTURE, Brown University, USA
Sophoclis PATSIAS, Rolls-Royce plc, UK
Uwe SCHULZ, German Aerospace Center, Germany
Fuh-Sheng SHIEU, National Chung Hsing University, Taiwan
Dmitry V. SHTANSKY, National University of Science and Technology "MISIS", Russia
Yongho SOHN, University of Central Florida, USA
Rodney TRICE, Purdue University, USA
Constantin VAHLAS, CIRIMAT-ENSIACET, France
Robert VASSEN, Forschungszentrum Juelich GmbH, Germany
José Filipe VILELA VAZ, Universidade do Minho, Portugal
Ping XIAO, University of Manchester, UK
Sam ZHANG, Nanyang Technological University, Singapore
Dongming ZHU, NASA Glenn Research Center, USA

Symposium CJ
Advances in Electroceramics

Programme Chair:
José Arana VARELA, Universidad Estadual Paulista, Brazil

Members:
Sheikh AKBAR, Ohio State University, USA
Neil ALFORD Imperial College London, UK
Akira ANDO, Murata Manufacturing Co. Ltd., Japan
David P. CANN, Oregon State University, USA
Xiang Ming CHEN, Zhejiang University, China
Mohammed ES-SOUNI, HAW Kiel-University of Applied Sciences, Germany
Ludwig GAUCKLER, ETH Zurich, Switzerland
Spartak S. GEVORGIAN, Chalmers University, Sweden
Adrian GOLDSTEIN, Israel Ceramic and Silicate Institute, Israel
Daniel GUYOMAR, LGEF-INSA Lyon, France
Hajime HANEDA, NIMS, Japan
Jacob L. JONES, University of Florida, USA
Sergei V. KALININ, Oak Ridge National Laboratory, USA
Stanislav KAMBA, Institute of Physics, Academy of Sciences, Czech Republic
Andrei KHOLKIN, University of Aveiro, Portugal
Eung Soo KIM, Kyonggi University, Korea
Ling Bing KONG, Nanyang Technological University, Singapore
Jong-Heun LEE, Korea University, Korea
Yongxiang LI, Shanghai Institute of Ceramics, China
Raffaella LO NIGRO, IMM-CNR, Italy
Ichiro MATSUBARA, AIST, Japan
Liliana MITOSERIU, University "Alexandru Ioan Cuza", Romania
Reginaldo MUCCILLO, Energy and Nuclear Research Institute, Brazil
Truls Eivind NORBY, University of Oslo, Norway
Toshio OGAWA, Shizuoka Inst.of Science & Technology, Japan
Hitoshi OHSATO, Nagoya Institute of Technology, Japan
Lorena PARDO, ICMM, CSIC, Spain
Ramamoorthy RAMESH, University of California, Berkeley, USA
Guus RIJNDERS, University of Twente, Netherlands
Edward M. SABOLSKY, West Virginia University, USA
Mailadil T. SEBASTIAN, NIIST - CSIR, India
Nava SETTER, EPFL, Switzerland
Derek C. SINCLAIR, University of Sheffield, UK
Andris STERNBERG, University of Latvia, Latvia
Danilo SUVOROV, Jozef Stefan Institute, Slovenia
Steven C. TIDROW, University of Texas-Pan American, USA
Isabel VAN DRIESSCHE, Ghent University, Belgium
Chan-Ho YANG, KAIST, Korea
Zuo-Guang YE, Simon Fraser University, Canada
Ki Hyun YOON, Yonsei University, Korea
Weiguang ZHU, Nanyang Technological University, Singapore

Special Session CJ-6
State-of-the-art Development and Application of Thin Film Piezoelectric MEMS/NEMS

Programme Chairs:
Massimo DE VITTORIO, University of Salento, Italy

Members:
Vladimir A. AKSYUK, NIST, USA
Seung-Hyub BAEK, KIST, Korea
Nazanin BASSIRI-GHARB, Georgia Institute of Technology, USA
Nico DE ROOIJ, EPF - IMT, Switzerland
Chang-Beom EOM, University of Wisconsin-Madison, USA
Marc FAUCHER, Université de Lille, France
Vittorio FERRARI, University of Brescia, Italy
Hiroshi FUNAKUBO, Tokyo Institute of Technology, Japan
Reza GHODSSI, University of Maryland, USA
Isaku KANNO, Kobe University, Japan
Chih-Kung LEE, National Taiwan University, Taiwan
Xinxin LI, Shanghai Inst.of Microsystem & Inf. Tech., CAS, China
Ryutaro MAEDA, UMEMSME / AIST, Japan
Gianluca PIAZZA, Carnegie Mellon University, USA
Ronald G. POLCAWICH, US Army Research Laboratory, USA
Denis REMIENS, Université de Valenciennes, France
Srinivas TADIGADAPA, Pennsylvania State University, USA
Ruud VULLERS, imec - Holst Centre, Netherlands

Symposium CK
Functional Magnetic Oxides

Programme Chairs:
Daniele MARRE', University of Genova, Italy
Silvia PICOZZI, CNR-SPIN, L'Aquila, Italy

Members:
Agnès BARTHELEMY, CNRS / Thales, France
Riccardo BERTACCO, Politecnico di Milano, Italy
Silke BIERMANN, Ecole Politechnique, France
Scott CHAMBERS, Pacific Northwest National Laboratory, USA
Sang-Wook CHEONG, Rutgers University, USA
Elbio DAGOTTO, Oak Ridge National Laboratory, USA
Roberto DE RENZI, Università degli Studi di Parma, Italy
Josè Maria DE TERESA, University of Zaragoza, Spain
Valentin Alek DEDIU, CNR-ISMN, Italy
Thomas DIETL, Institute of Physics, Polish Academy of Sciences, Poland
Craig FENNIE, Cornell University, USA
Alessio FILIPPETTI, University of Cagliari, Italy
Giacomo GHIRINGHELLI, Politecnico di Milano, Italy
Edmondo GILIOLI, IMEM-CNR, Italy
Harold HWANG, Stanford University, USA
Masashi KAWASAKI, University of Tokyo, Japan
Tsuyoshi KIMURA, Osaka University, Japan
Hideomi KOINUMA, Tokyo University, Japan
Darko MAKOVEC, Josef Stefan Institut, Slovenia
Neil D. MATHUR, University of Cambridge, UK
Tanusri SAHA-DASGUPTA, S.N. Bose National Center, India
Jacobo SANTAMARIA, Universidad Complutense de Madrid, Spain
George SAWATZSKY, University of British Columbia, Canada
Susanne STEMMER, University of California, Santa Barbara, USA
Hitoshi TABATA, University of Tokyo, Japan
Hidekazu TANAKA, Osaka University, Japan
Jean-Marc TRISCONE, Université de Genève, Switzerland
Jeroen VAN DEN BRINK, IFW Dresden, Germany
Maria VARELA, Oak Ridge National Labs., USA
Antonio VECCHIONE, CNR-SPIN, Italy

Symposium CL
Inorganic Materials Systems for Optical and Photonic Applications

Programme Chair:
Maurizio FERRARI, CNR-IFN, Italy

Members:
Jean-Luc ADAM, CNRS Université de Rennes I, France
Tomoko AKAI, AIST, Japan
John BALLATO, Clemson University, USA
Marco G. BETTINELLI, Università di Verona, Italy
Dieter BIMBERG, Technical University Berlin, Germany
Richard J. BLAIKIE, University of Otago, New Zealand
Brigitte BOULARD, Université du Maine, France
Louise BRADLEY, Trinity College Dublin, Ireland
Connie J. CHANG-HASNAIN, University of California, Berkeley, USA
Xiaolong CHEN, Institute of Physics, CAS, China
M. Lucia CURRI, CNR IPCF Bari Division, Italy
Shanhui FAN, Stanford University, USA
Olexander V. GEKTIN, Institute of Scintillation Materials, Ukraine
Min GU, Swinburne University of Technology, Australia
Jong HEO, POSTECH, Korea
Mikio HIGUCHI, Hokkaido University, Japan
Kazuyuki HIRAO, Kyoto University, Japan
Frank HUBENTHAL, University of Kassel, Germany
Mile IVANDA, Rudjer Boskovic Institute, Croatia
Nigel P. JOHNSON, University of Glasgow, Scotland
Safa KASAP, University of Saskatchewan, Canada
Peter KAZANSKY, University of Southampton, UK
Marian MARCINIAK, National Institute of Telecommunications, Poland
Joanna McKITTRICK, University of California, San Diego, USA
Naoki OHASHI, NIMS, Japan
Gary R. PICKRELL, Virginia Tech, USA
Jianrong QIU, Zhejiang University, China
Roberta RAMPONI, Politecnico di Milano, Italy
Giancarlo RIGHINI, Centro Fermi, Italy
Federico ROSEI, Université du Québec, Canada
Vladimir M. SHALAEV, Purdue University, USA
Setsuhisa TANABE, Kyoto University, Japan
Katsuhisa TANAKA, Kyoto University, Japan
Franck TESSIER, CNRS - Université de Rennes 1, France
Sergei A. TRETYAKOV, Aalto University, Finland
Dae Ho YOON, Sungkyunkwan University, Korea
Nikolay I. ZHELUDEV, University of Southampton, UK

Symposium CM
Inorganic Polymers (Geopolymers) and Geocements: Environmentally Friendly Ceramic Materials for Low-Technology and High-Technology Applications

Programme Chair:
Kenneth J.D. MacKENZIE, Victoria University of Wellington, New Zealand

Members:
Erez ALLOUCHE, Louisiana Tech University, USA
Christopher CHEESEMAN, Imperial College, UK
Katja DOMBROWSKI, TU Bergakademie Freiberg, Germany
Tomas HANZLICEK, Academy of Sciences of the Czech Rep., Czech Rep.
Waltraud M. KRIVEN, University of Illinois at Urbana-Champaign, USA
Cristina LEONELLI, University of Modena and Reggio Emilia, Italy
Zongjin LI, The Hong Kong University of Science & Technology, China
Henk NUGTEREN, Delft University of Technology, Netherlands
Kiyoshi OKADA, Tokyo Institute of Technology, Japan
Hassane OUDADESSE, University of Rennes1, France
Angel PALOMO SANCHEZ, CSIC - Eduardo Torroja Institute, Spain
John L. PROVIS, Sheffield University, UK
Kwesi SAGOE-CRENTSIL, CSIRO Manufacturing & Materials Technology, Australia
Arie VAN RIESSEN, Curtin University of Technology, Australia
Marcel WEIL, Forschungszentrum Karlsruhe, Germany
Wanchai YODSUDJAI, Kasetsart University, Thailand

Symposium CN
Science and Technology for Silicate Ceramics

Programme Chair:
Michele DONDI, CNR-ISTEC, Italy

Members:
Philippe BLANCHART, ENSCI, France
Federica BONDIOLI, Università di Modena e Reggio Emilia, Italy
Anselmo O. BOSCHI, Univ.Federal de São Carlos-UFSCar, Brazil
Vilma DUCMAN, ZAG Ljubljana, Slovenia
Pierre FLAMENT, Belgian Ceramic Research Centre, Belgium
Christopher HALL, University of Edinburgh, Scotland
Dachamir HOTZA, UFSC, Brazil
Fakher JAMOUSSI, CNRSM, Technopole Borj Cedria, Tunisie
Alpagut KARA, Anadolu University, Turkey
Alexander KARAMANOV, Institute of Physical Chemistry, Bulgaria
Bekir KARASU, Anadolu University, Turkey
Joao A. LABRINCHA, University of Aveiro, Portugal
Araceli E. LAVAT, Universidad Nacional del Centro de la Prov.de Buenos Aires, Argentina
Arnaldo MORENO BERTO, Instituto de Tecnología Cerámica, Spain
Guido NASSETTI, Centro Ceramico Bologna, Italy
Manuel OCANA JURADO, Materials Science Institute of Sevilla, CSIC, Spain
Mariarosa RAIMONDO, CNR-ISTEC, Italy
Maximina ROMERO PEREZ, IETCC, CSIC, Spain
Juan Jacobo RUIZ VALDES, Universidad Autonoma de Nuevo Leon, Mexico
Mariya SEDELNIKOVA, Tomsk Polytechnic University, Russia
Toyohiko SUGIYAMA, AIST, Japan
Paolo ZANNINI, Università di Modena e Reggio Emilia, Italy

Symposium CO
Refractories: Developments in Raw Material, Production and Installation, Modelling, and Testing/Performance

Programme Chair:
James P. BENNETT, NETL-USDOE, USA

Members:
Esteban F. AGLIETTI, CETMIC, Argentina
Christos G. ANEZIRIS, TU Bergakademie Freiberg, Germany
Carmen BAUDIN, Instituto de Ceramica y Vidrio, CSIC, Spain
Goutam BHATTACHARYA, Kerneos India & Middle East, India
Bart BLANPAIN, Catholic University of Leuven, Belgium
Richard C. BRADT, University of Alabama, USA
Elena BRANDALEZE, Universidad Tecnologica Nacional, Argentina
Thierry CUTARD, Ecole des Mines d'Albi-Carmaux, France
Swapan Kumar DAS, Central Glass and Ceramic Research Institute, India
Harald HARMUTH, University of Leoben, Austria
Marc HUGER, ENSCI-CEC, France
Yawei LI, Wuhan University of Science & Technology, China
Manuel MIRANDA, ITMA Materials Technology, Spain
Kusuhiro MUKAI, Kyushu Institute of Technology, Japan
George OPREA, The University of British Columbia, Canada
Toshitaka OTA, Nagoya Institute of Technology, Japan
Victor Carlos PANDOLFELLI, Universidad Federal de Sao Carlos, Brazil
Christopher PARR, Kerneos, France
M.D. PATIL, Corning Incorporated, USA
Jacques POIRIER, Polytech' Orléans, France
Michael RIGAUD, Polytechnique Montreal, Canada
Nigel STONE, CSIRO Materials Science & Engineering, Australia
Kiyoshi SUGITA, The Technical Association of Refractories, Japan
Analia G. TOMBA MARTINEZ, INTEMA, Argentina

CP - 7th International Conference
Advanced Inorganic Fibre Composites for Structural and Thermal Management Applications

Co-Chair:
Mrityunjay SINGH, NASA Glenn Research Center, USA (Programme Chair)
Shaoming DONG, Shanghai Institute of Ceramics, CAS, China
Walter KRENKEL, Universität Bayreuth, Germany
Tatsuki OHJI, AIST, Japan

Members:
Rajiv ASTHANA, University of Wisconsin-Stout, USA
Laifei CHENG, Northwestern Polytechnical University, China
Monica FERRARIS, Politecnico di Torino, Italy
Andrew L. GYEKENYESI, NASA Glenn Research Center, USA
Kiiyoshi HIRAO, AIST, Japan
Toshihiro ISHIKAWA, UBE Industries Ltd., Japan
Yutaka KAGAWA, University of Tokyo, Japan
Hai-Doo KIM, Korea Institute of Materials Science, Korea
Jacques LAMON, LMT ENS Cachan, France
David MARSHALL, Teledyne Scientific, USA
Sergei T. MILEIKO, Solid State Physics Institute, RAS, Russia
Gregory MORSCHER, University of Akron, USA
Dileep SINGH, Argonne National Laboratory, USA
Junichi TATAMI, Yokohama National University, Japan
Guo-Jun ZHANG, Shanghai Institute of Ceramics, CAS, China

Cimtec 2014

Piva 03368230409
Phone +39 0546 22461 - Fax +39 0546 664138
Corso Mazzini 52 48018 - Faenza (RA) - Italy
Software Commercio Elettronico by Pianetaitalia.com